CONTROL Resonant

Quest · Contain the Crisis

Reroute power through the subway

Power Lines

Центральный район · Central · Main story

Complete Arish's Briefing, then reroute the Perimeter, Factory and East Park stations. That unlocks the Vanished Station, where you solve Platform A and Platform B and report back to Dr. Florez.

Start walkthroughChoose a station
  • 3 Central stations
  • 2 Vanished platforms
  • 1 Living Shard
Power grid
  • Perimeter Station
  • Factory Station
  • East Park Station
Vanished Station

Three stations first, then one shared route to the Vanished Station.

Platform A → Platform B · Dr. Florez

Quest at a glance

Questline
Contain the Crisis
Starts
Central · Field Office
Requires
Arish's Briefing
Goal
Reroute subway power
Initial stations
Perimeter · Factory · East Park
Final area
Vanished Station
Final NPC
Dr. Florez
Reward
Living Shard

How to start Power Lines

Quick answer

Complete Arish's Briefing and speak with Arish at the Field Office in Central.

Power Lines opens right after Arish's Briefing and becomes one branch of Notes: Plan of Attack.

Why it matters: the CFD needs the city's power back to hold Manhattan, so Arish sends you to bring the subway grid online.

Prerequisite

Arish's Briefing →

Part of

Plan of Attack →
Power Lines not appearing?

Check these before assuming a bug:

  • Is Arish's Briefing complete?
  • Did you finish the Field Office conversation?
  • Is Notes: Plan of Attack active?
  • Do the Central station objectives show on your map?
Still missing? Open the Quest Troubleshooter

How station calibration works

Every station uses the same pieces. Learn them once here instead of re-reading them at each station.

Calibration Unit

A portable device used to tune the station.

  • Box-like shape
  • Shows a map marker when you are near
  • Fits on a yellow placement square

Every station uses the same object, so learn this shape once.

Tuning Device

The station's dial. When every Calibration Unit sits on the right square, activate it to reroute the station.

Power Charge

Take the charge, carry it to an inactive core, and deposit it to power or open part of the route.

Mold

Mold is not always an enemy here. Some growths block you, and some carry the current.

Blocking Mold

Destroy

Covers a route or a placement square and stops the puzzle.

Conductive Mold

Do not destroy

Carries power to the Tuning Device. Destroying it cuts the connection.

Too many marked squares?

Not every visible square belongs to the solution. Read them from the Tuning Device view and use the station arrangement below.

Place the units on the marked squares, then activate the Tuning Device.

Power grid

Track the three Central stations, then the Vanished Station.

0 / 3 Central stations rerouted
Central stations
Vanished StationLocked
Platform A
Platform B

Saved in this browser only. It never reads your game save.

Route overview

The first half is three independent stations; the second half is one ordered chain.

Field Office

Central power stations

  • Perimeter Station
  • Factory Station
  • East Park Station
Vanished Station
Platform A → Platform B
Dr. Florez
Central →
Act I

Restore the surface network

Central stations

Reroute these three in any order.

Perimeter Station

Placement puzzle

Quick solution
  1. Find 3 Calibration Units
  2. Open the shutter using the power charge
  3. Place the units on the marked squares
  4. Activate the central device
Show detailed steps
Where it is
East of the Field Office in Central.
How to enter
Take the station entrance east of the Field Office and head underground.
Find the Calibration Units
Three Calibration Units are inside the station. One sits behind a shutter you open by moving the power charge.
Correct placement
Place each unit on its marked yellow square. The squares are fixed, so match each unit to a square instead of lining them up.
Activate the Tuning Device
With all three units on their squares, activate the central Tuning Device.
Success state
  • The machine indicator changes
  • The station objective updates
  • The power grid tracker advances
Common mistake

Treating Perimeter like a straight line. It is a placement puzzle, and each unit belongs on its own square.

Factory Station

Alignment puzzle

Quick solution
  1. Find the 3 Calibration Units
  2. Line them up with the device
  3. Activate the device
One straight line

Correct

Incorrect

If the units are offset, the station will not calibrate.

Show detailed steps
Where it is
The Factory station, reached from Central.
How to enter
Enter the Factory station and head down to the tracks.
Find the Calibration Units
Three units: one near the entrance, one in the tunnel, and one beside the train.
Correct placement
Set the three units in one straight line that feeds into the Tuning Device.
Activate the Tuning Device
Once the line is unbroken, activate the Tuning Device.
Success state
  • The machine indicator changes
  • The station objective updates
  • The power grid tracker advances
Common mistake

Leaving one unit off the line. Factory is alignment, not placement.

East Park Station

Mold + teleport puzzle

Quick solution
  1. Destroy the Mold over the placement spots
  2. Collect the reachable Calibration Units
  3. Use the Tuning Device
  4. Reach the gated unit
  5. Open the gate from inside
  6. Place all three units
  7. Activate the station

Can't reach the last Calibration Unit?

That is intentional. Clear the required Mold, use the Tuning Device, and let it drop you inside the locked area, then open it from the inside.

Show detailed steps
Where it is
East Park station, in Central.
Find the Calibration Units
Destroy the Mold covering the placement spots first.
How to enter
One Calibration Unit is sealed in a gated area.
Activate the Tuning Device
Use the Tuning Device. Its off-target calibration sends Dylan into the gated area.
Correct placement
Open the gate from the inside, carry the unit back, then place all three units.
Success state
  • The machine indicator changes
  • The station objective updates
  • The power grid tracker advances
Common mistake

Trying to reach the gated unit before using the Tuning Device, or skipping the Mold.

Act II

The Vanished Station

Vanished Station

The three stations are done. From here the route becomes one ordered chain.

Off grid
Expected quest event

The exit is a wall — what now?

This is part of the quest. Do not reload. Follow the station sequence and take the newly available subway route.

When the required stations are online, the way out changes on purpose. That is the quest moving you toward the Vanished Station.

Current state
  1. Access the survivors
  2. Power Platform B
  3. Reach Platform A
  4. Calibrate Platform A
  5. Configure the Mold at Platform B
  6. Calibrate Platform B

Platform A must be completed before Platform B.

You are not alone down here: the missing maintenance crew survived.

Platform A

Keep Platform A separate from the Platform B Mold logic.

Quick solution
  1. Reach Platform A from Platform B
  2. Restore the necessary power
  3. Open the route to the Calibration Unit
  4. Clear the blocking Mold
  5. Place both units
  6. Calibrate Platform A
Can't calibrate Platform A?
  • Did you reach Platform A?
  • Is the required gate open?
  • Do you have both Calibration Units?
  • Is Mold blocking a placement spot?
  • Is each unit actually on its marked square?

Platform B

Platform B is a power-and-Mold state puzzle. The Mold over the wires must stay; the Mold over the pads must go.

Power

Mold

Wire left
Wire right
Pad left
Pad right

Calibration Units

Not ready yet
  • Power Platform B again to regrow the conductive Mold.
  • Keep the Mold over both wires. It conducts the power.
  • Clear the Mold from both placement pads.
  • Place both Calibration Units on the pads.
Why this works
DEVICE
Calibration Units

Clear the sides

Calibration Units

Clear the sides

Keep ✓
Keep ✓

Power flow

  1. Power Platform B so the Mold grows
  2. Keep the Mold over both wires
  3. Clear the Mold from both pads
  4. Place both Calibration Units
  5. Calibrate Platform B

Talk to Dr. Florez

Final station encounter

Calibrating Platform B triggers a fresh Mold wave. If a stronger named enemy appears, stay alive and clear the arena before you head back to the survivors.

One step left

Both platforms calibrated does not finish the quest. Return to the survivors and speak with Dr. Florez.

Show location
Reward

Completing Power Lines grants a Living Shard.

The final conversation with Dr. Florez is what actually closes the quest.

Plan of Attack progress

Power Lines completes the subway-power branch of Notes: Plan of Attack.

Other objectives may still remain before the story continues.

Check Plan of Attack
Power Lines complete
  • Perimeter Station
  • Factory Station
  • East Park Station
  • Vanished Station
Subway power
Online
Plan of Attack
Subway power objective updated

Power Lines troubleshooting

What's happening?

None of these? Open the Quest Troubleshooter
What next?

What's left before I can continue the story?

This completes the subway-power branch of Notes: Plan of Attack. Other objectives may still remain.

Stuck on a step?

Ask about Platform B, the Mold, or anything else on this page and the assistant already knows where you are.

Ask about this step →
Where this page sits

Power Lines is one quest inside Contain the Crisis. Return to the quest hub to pick the next objective, or open the walkthrough to see how it fits the full route.

Browse all questsOpen the progression walkthrough
Quest Troubleshooter